Working Principle of Raymond Mill

Physics APIs, Physics file formats, Maya, Max, XSI, Cinema 4D, Lightwave, Blender, thinkingParticles™ and other simulation tools, exporters and importers
Post Reply
Posts: 1
Joined: Thu Nov 06, 2014 3:28 am

Working Principle of Raymond Mill

Post by crusherment »

With qualified products and good service, we supplies series Raymond Roller Mill(Raymond Mill), which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc.

Working Principle of Raymond Mill:
First material should be crushed into the desired size by Jaw Crusher, and delivered to the Silo by Bucket Elevator. Our Designed Vibrating Feeder will feed the material into the grinding room. With the air current from the Air Blower, those powder conforms to the fineness degree will be blew into the cyclone collector and those powder that is not consistent with the desired size will return to the grinding room to be re-ground. The whole system is airtight circulation, and the circulatory flow under the negative pressure.

Raymond Mill Structural Characteristics :
The whole raymond grinder is of a standing structure. Raymond mill features small occupying space and strong integration capacity. Raymond Roller mill can form an independent production system from the lump materials , crushing to finished powder and packaging. All the finished particles have a good uniformity of fineness, with passing screen rate as high as 98%. This is what other machine cannot reach. The machine adopts electromagnetic vibrating feeder, which ensures even and regular feeding.Raymond mill is easy to adjust, small in dimension, light in weight, with lower oil and power consumption and easy to maintain. The transmission device of the main unit is equipped with a close gearbox which ensures its smooth transmission and reliable operation. Attendance of operater is not necessary in the mill operating room because the adoption of advanced central control console switch.

The fine powder flows into the cyclone collector together with air flow and is expelled from the powder Raymond Mill output pipe as product. In the grinding chamber, since the stuff contains moisture to some extent, the heat generated during grinding makes the moisture evaporate; since the pipeline joints are not airtight, the external air is sucked in and the circulation air mass increases. In order to enable the grinder to work in negative pressure, the increased air flow is guided to the deuster and sequentially to the atmosphere after purification.
Post Reply